
NRG Greenboard. Made in Yatala, stocked everywhere.
The volume EPS render board of South East Queensland. CodeMark-certified for Class 1 to 10, cyclonic fixing tables, and next-day supply from more than seventy Queensland distributors.
- Sheet2480 × 1200 mm; 4960 mm long in 75 and 100 mm
- Thickness40 to 100 mm certified; 20, 25 and 110 mm also sold
- CoreClass M flame-retardant EPS, about 19 kg/m³, with Bifenthrin termite retardant, grooved both faces
- FixingDirect fix with screws and 40 mm washers, or Cavity Release on EPS, timber or steel battens
- WindN1–N5 and C1–C4
- BushfireBAL-29 at 75 mm and above with 10 mm render
- ThermalPanel R1.03 / 1.28 / 1.54 / 1.93 / 2.57 for 40 to 100 mm
- ClassesNCC Class 1–10, fire resistance excluded
- CertificationCodeMark CM30005, Global-Mark
- Warranty10 years on sheets; render partner warranties separate
What it is
NRG Greenboard is a flame-retardant EPS sheet made twenty minutes down the motorway at Yatala. Both faces are grooved, the inside face to drain and the outside face to key the render. It is the board most Queensland renderers learned on, which means every trade centre carries it and every crew knows the fixing pattern.
It is our default for standard Class 1 housing where the lot is non-cyclonic, outside a bushfire overlay and clear of the boundary setbacks, because it is the most economical certified system and the one with the shortest supply chain.
System build-up
- Class 4 vapour-permeable wrap to AS 4200.1 on the frame
- EPS, timber or steel battens for Cavity Release, or direct fix
- Sheets laid horizontally from the starter bead, edges glued or foam-filled, screwed and washered to every stud at 300 mm rows or closer by wind class
- UV-stabilised PVC or aluminium beads at corners, reveals, sills and expansion joints
- NRG PM Render with 160 g alkali-resistant mesh, 3 to 6 mm, 10 mm for BAL-29
- Tinted primer, NRG Sand texture, Shieldcoat membrane where specified
Rockcote, Unitex, Haymes and other render systems also publish specifications for NRG Greenboard, and we use them where the builder's coating supplier prefers.
Where it fits
Volume housing and multi-lot releases where a consistent, available, certified board matters more than anything else. Sites north of the cyclone line where it is the only board in this set with C1 to C4 fixing tables. Curved walls, where the 40 mm sheet bends to a two to four metre radius and 20 mm laminates handle tighter curves.
Limits to design around
EPS is combustible and the CodeMark expressly excludes non-combustibility and fire resistance, so no FRL walls and no Type A or B construction. Only the 40 to 100 mm sheets are certified. BAL-29 needs 75 mm minimum and a full 10 mm render. Control joints vertically at 8 m and horizontally at floor levels, and always where the board meets another substrate. Colour LRV of 40 or higher is a condition of the render warranty.
Certification and evidence.
What the certificate covers, and what we hand over to prove the installation matches it.
CodeMark CM30005 Rev 4 is issued by Global-Mark against NCC 2022 Volumes One and Two for Class 1 to 10, covering structure, rising damp, weatherproofing, bushfire to BAL-29 and energy efficiency, with Volume One Section C fire provisions excluded. It is conditional on installation to Specification Manual Edition 13 by an NRG-trained installer, and on the Application for CodeMark Certification being signed by supplier, builder and installer and lodged with NRG within a month of completion.
We lodge that application and the Cavity Release checklist on every job and keep the Warringtonfire BAL-29 statement on file for any lot in a bushfire overlay.
How we fix and render it.


Cut with a diamond blade or hot knife. Sheets from the bottom up, 36 fixings per sheet at the standard spacing, tightening up to the certified table for N4 and N5 or cyclonic classes and in the 1200 mm edge zones. Off-stud joints on 40 and 50 mm sheets are back-blocked; thicker sheets may be foam-joined. Beads glued plumb, two-stage sealing at joinery, surface rasped flat before the first render coat. Twenty-four hours between PM Render and the next coat, longer with partner systems.
Warranty and maintenance
NRG warrants the sheets against factory defects for ten years, transferable, with claims in writing within 30 days. The render system warranty comes from the coating partner: ten years with NRG's own components and proof of purchase, fifteen with Rockcote, seven with Unitex. No formal maintenance programme is published, so we supply ours and hold the owner to the LRV rule.
Manufacturer documents.
Linked to the manufacturer's own hosting so you always get the current revision. Our own guides are on the resources page.
Basroc
Non-combustible, fire-rated to 90/90/90, BAL-FZ, silica-free. The substrate for boundary walls, fire-separation zones and anything that needs an FRL.
System page →CSR Hebel
Solid steel-reinforced aerated concrete on top hats. Non-combustible, FRL to 180/180/180, BAL-FZ, cyclonic to C3 and a 20-year CSR warranty. The masonry feel without the bricklayer.
System page →Sto
The German EIFS pedigree, delivered in Australia through Sto Australia. Specified where the project calls for the Sto system and the StoWarranty.
System page →Unitex
Australia's original EIFS. Cavity and non-cavity CodeMarks, and the only EPS system in this set with a BAL-40 pathway.
System page →Dulux Exsulite
The Dulux-backed cavity system with the AcraPro, Acratex and AcraShield coating stack and the Dulux Trade Centre network behind it.
System page →