Render substrate · Sto Australia

Sto. The EIFS the architects name.

StoTherm insulated facade systems and StoArmat render systems, delivered in Australia by Sto Australia, the company that also makes Unitex. Specified where the project wants the Sto system, the Sto finish and the StoWarranty.

Key facts
  • SystemsStoTherm Armat (frame and masonry), StoTherm Vario, StoTherm Mineral, StoArmat render systems, StoVentec R rainscreen
  • InsulationStoTherm EPS 40–100 mm+, or 80 mm mineral wool board
  • FixingVented self-adhesive EPS cavity battens with StoTherm anchors
  • RenderStoLevell Novo basecoat, StoArmat reinforcing render with glass mesh, Stolit finish, StoColor topcoat
  • FireSto renders Euroclass A2-s1,d0 to EN 13501-1
  • Certified pathwayUnitex Base Board CodeMarks (same company) for Class 1 and 10
  • WarrantyStoWarranty 10, 15 or 20 years by system with StoService Assurance
  • SupplyDandenong South VIC, Queensland stock via Crowntex Yatala

What it is

Sto SE is the German facade company that effectively invented external insulation and finish systems. In Australia it trades as Sto Australia, the renamed Unitex business it bought in 2019. That means two things sit under one roof: the Sto-branded StoTherm and StoArmat systems with their European data sheets and New Zealand BRANZ appraisals, and the locally made Unitex Base Board with Australian CodeMark certification.

We install both. When an architect specifies Sto, the finish they are picturing is a Stolit texture over a StoArmat basecoat, and that stack can go over a Unitex board, a StoTherm EPS panel, or masonry.

System build-up

  • Vapour-permeable wrap, then vented EPS cavity battens on every stud
  • StoTherm EPS panel, H or M grade, fixed with StoTherm impact or countersunk anchors capped in EPS
  • StoLevell Novo or LevelLite levelling basecoat where needed
  • StoArmat reinforcing render with 4 mm or 7 mm glass-fibre mesh, minimum 2.5 mm dry film
  • Stolit K, MP or Milano finishing render in the specified grain
  • StoColor Lotusan, X-black or Maxicryl topcoat

StoArmat over masonry, AAC, Hebel, AFS Logicwall, Knauf Permarock and fibre cement follows the same primer, basecoat, mesh, finish sequence without the insulation layer.

Where it fits

Architect-led custom homes, display homes and the premium elevations of a release where the specification names Sto. Also remedial and overclad projects where the Sto remedial system is the nominated repair. The Stolit finishes and StoColor coatings are the strongest reason to choose it: a wide grain range, strong colour retention and the Lotusan self-cleaning surface.

Limits to design around

The Sto-branded systems carry New Zealand BRANZ appraisals and German approvals rather than an Australian CodeMark, so on a Queensland job they are delivered as a Performance Solution with Sto Australia's technical support, or the facade is built on Unitex Base Board under its CodeMark with the Sto finish over it. We set this out plainly at quote stage so the certifier has no surprises. A Euroclass A2 render rating is not an AS 1530.1 non-combustibility determination, and we do not present it as one.

Compliance

Certification and evidence.

What the certificate covers, and what we hand over to prove the installation matches it.

For Class 1 and 10 work the certified route is Unitex Base Board: CodeMark CM70007 Rev 5 for the non-cavity system (Bureau Veritas, up to N4) and CM-AUS-80002 Rev 5 for the cavity system (BRANZ, up to N3), both held by Sto Australia. The Sto-branded systems reference BRANZ appraisals 468, 478, 488, 515, 604, 605, 739 and 772 held by Stoanz Ltd, which support a Performance Solution rather than a Deemed-to-Satisfy pathway.

Every Sto package we quote states which route applies, and we supply the Sto quality assurance record, the StoWarranty request and the certificate of installation at completion.

Installation

How we fix and render it.

Curved rendered facade at night
Window reveal in render

StoTherm panels are left seven to fourteen days before rendering to limit pillowing, which we build into the programme. Anchors are drilled, countersunk and capped so the facade reads as one plane. StoArmat goes on in two passes with the mesh embedded wet, and Stolit follows after 24 hours. Control joints run vertically at 20 m maximum and horizontally at every floor. The Sto specification is followed to the letter because the StoWarranty depends on it.

Warranty and maintenance

StoWarranty runs 10, 15 or 20 years depending on the system, with Armat at 20, conditional on a registered contractor, a complete quality assurance record and a lodged warranty request. StoService Assurance is an inspection every two and a half years at the owner's cost. Unitex Base Board carries its own seven-year product warranty. Recoat intervals are ten to twelve and a half years.

Downloads

Manufacturer documents.

Linked to the manufacturer's own hosting so you always get the current revision. Our own guides are on the resources page.

  • StoTherm timber and steel frame brochure
    System overview and energy efficiency
    Open PDF
  • SS106 StoTherm Armat specification
    Full specification, Sto NZ, 2024
    Open PDF
  • BRANZ Appraisal 478 StoTherm
    2025 appraisal held by Stoanz
    Open PDF
  • StoArmat Classic TDS
    Reinforcing render data sheet
    Open PDF
  • Stolit K TDS
    Finishing render data sheet
    Open PDF
  • StoWarranty and StoService Assurance
    Warranty terms
    Open PDF
Start a package

Send us your plans.

We price the substrate, render and paint as one package and come back with system options that suit the site, the wind class and the programme.

Request a package quote

Phone
+61 408 028 108

Email
hello@bespokecr.com.au

Region
Brisbane, Gold Coast and Sunshine Coast